Everything you need to install ClearVU!

Template #31 Location

Close-up of a car backup camera mounted on a red vehicle with the number '31' on a yellow triangular bracket.
Close-up of a black automotive part with two open holes, labeled 'BKT' and 'PCC', with a black rubber hose attached to one of the openings.

Special note: Please drill 1/2 in pass through hold to allow hose connection.

Verify your camera housing matches what is shown in the picture*

  • Template #31 (Found in your ClearVU Kit)

  • Sharp Razor Blade/Knife

  • Side Cutters

  • Step Drill (Or 5/16” Drill)

  • Torx Bits

  • Socket Set

  • Center Punch or Marker

What You Will Need:

Take Me Back To Checkout

Please let us know if there is anything we can do to help you better understand the installation process!