Wolfbox G900 Pro Install
Installation Steps
Step 1:
Remove content from ClearVU kit, ensure all components are present and set to the side.
Step 2:
Open the hood and locate the windshield wiper fluid line running to the front windshield wiper fluid nozzles.
Step 3:
Cut the rubber hose and insert the provided T-Fitting into the existing hose.
Step 4:
Cut a 3”-5” piece of hose and attach one end to the T-Fitting; take the Shut-Off Valve and attach it to the other end of the 3”-5” section of hose.
Step 5:
Run the rubber hose, provided in your ClearVU kit, from the Shut-Off Valve to the Wolfbox G900 Pro Camera. Ensure hose is tucked away and secured to any non-moving parts of the vehicle.
Step 6:
Insert Check Valve(s) provided in your kit roughly 3”-5” away from Washer Nozzle. BE SURE THE ARROW IS POINTED IN THE DIIRECTION OF FLOW.
Step 7:
Attach Washer Nozzle to Wolfbox G900 Pro by pressing it down over Wolfbox G900 Pro camera, firmly but carefully, until you hear it snap into position.
Step 8:
Attach hose to Washer Nozzle and test your ClearVU System.
Step 9:
Enjoy a Clear View with ClearVU!!!
*If any parts are lost, defective, or broken during install, please contact to have a replacement shipped to you at no cost. Contact: customer service at (716)-492-1653 or customerservice@clearvucam.com
Please let us know below if there is anything we can do to help you better understand the installation process!