Santa cruz (2022-2026) install
template #58

*Ensure your camera housing matches what is shown in this picture.
Drill template reference
See where your template goes and compare it with other vehicles that use the same template.
What You Will Need:
- Template #58 (Found in your ClearVU Kit)
- Side Cutters
- Step Drill (Or 5/16” Drill)
- T30 torx bit
- trim/tab removal tool
- phillips head
- fish tape (or something similar to route hose
- electrical tape
- drill
- 10mm Socket
- Center Punch or Marker
*If any parts are lost, defective, or broken during install, please contact to have a replacement shipped to you at no cost. Contact: customer service at (716)-492-1653 or customerservice@clearvucam.com
Need help with your install?
Our team is happy to walk you through it. Call customer service at (716) 398-2246 or email customerservice@clearvucam.com.