DESIGNED & ASSEMBLED IN BUFFALO NY · FREE SHIPPING ANYWHERE IN THE LOWER 48
Vehicle-Specific Kit

Ranger (2024-2026)

(5 customer reviews)
4.6 · 5 reviewsPN: 52 T-101

$99.99

Free shipping over $75

The ClearVU backup camera cleaner is a vehicle-specific kit engineered for the Ford Ranger (2024-2026), keeping your rear-view camera lens clear in rain, snow, mud, and road salt. This aftermarket camera lens cleaning system taps into your factory windshield washer lines and sprays the lens on demand from the driver’s seat with the push of a button. The complete DIY install kit ships with model-specific drill templates, spray nozzle, hoses, and step-by-step instructions for a clean, OEM-style fit.

  • Less than 1 Hour
  • Zero Wiring
  • -41°F to 120°F
  • Made in USA
Everything In The Box

What's Included.

  • Installation instructions
  • 27 ft. OEM-grade washer fluid hose
  • Vehicle-specific drill template
  • T-fitting
  • Check valve
  • (2) Zip ties
  • T-101 spray nozzle
The Long Version.

Built For Your Ranger (2024-2026)

ClearVU keeps your Ranger (2024-2026) backup camera clean and clear in all driving conditions. Dirt, rain, snow, and road salt can quickly obstruct your camera lens; ClearVU lets you clean it instantly from the driver’s seat with the push of a button.

This vehicle-specific aftermarket system integrates with your existing windshield washer system and delivers washer fluid directly to the camera lens. Each spray nozzle is precision designed to ensure proper fitment, effective coverage, and an OEM-style appearance.

Our DIY kit includes all required hardware, drill templates, and step-by-step instructions for a straightforward at-home installation.

Tech Sheet

Part Number52 T-101
FitsRanger (2024-2026)
Install TimeLess than 1 Hour
Operating Range-41°F to 120°F
Watch Before You Drill.

How To Install — Step By Step.

Template Photos

Template #52 Location

Verify your camera housing matches what is shown in the picture*

See Template #52 on the Drill Template Reference

Tools Needed

What You Will Need:

  • Template #52 (Found in your ClearVU Kit)
  • Small o-ring (Found in your clearvu kit)
  • Sharp Razor Blade
  • Side Cutters
  • Step Drill (Or 5/16” Drill)
  • Torx Bits
  • Socket Set
  • Center Punch or Marker

View the full install guide

Don't Take It From Us.

From The People Who Actually Drive In This Stuff.

Reviews for this kit
4.6★★★★★5 reviews
See all 91 ClearVU reviews ›
★★★★★Aug 10, 2026

I was debating a 5 star, but I ran into some issues while installing. Not big deals, just a little irritating. The back washer install was going good until you get to the white nut part that goes on the rear squirter. No room on mine to hold it tight. Maybe wormed out the hole some to move it some? I just screwed it into to hole without the nut on it. I didn't have much room for water line if I left it screwed on also. Took me a few tries to fish the line in the frame and pick a hole to use. I did it in two parts. I also fished the line up to the same spot as the original washer line comes up. You don't show any of that install part. It works great! A lot of water comes out. I may throttle the on/off valve some. What is the big/fat o ring supplied for?

— Mark Mitchell
★★★★★Jun 22, 2026

I am very happy with the clearvu back up camera. I have a 23 Ford Maverick but I wasn't able to purchase the Maverick camera cleaner. So I purchased the Ford Ranger instead and I made it work. I used PVC Flex able conduit for underneath and I tie wrapped it up over the guard shield. The Ford emblem was a little different but I made it work. The windshield washer hose was made of plastic but the connectors still worked. I highly recommend this for everyone. 5 Star ⭐⭐⭐⭐⭐+ Well done clearvu

— Mike Davison
★★★★★Mar 30, 2026

Install went well, thanks for the video, adjusted the front exit point to be just behind the cab support then up the rear part of the fender to tie in with the path of the supply. Even posted the outcome on our Ranger6G site. https://www.ranger6g.com/forum/threads/rear-camera-washer-install.28297/#post-409069 Would like to do the front one, but another $100 is a bit much!

— Joseph Duffy
★★★★★Mar 7, 2026

Doesn't quite work for my 2024 Ford Ranger when it comes to routing the hose from front of truck frame as your demolition. I happened to have a plumbing snake that's long enough to use. So I followed video up to turning front wheels in so as to give me better access to the small hole in frame at front passenger side. I feed the plumbing snake in the hole towards the back of truck and when you get to the rear back wheel, something stops the plumbing snake from continuing. I also went from back of truck to the front in the frame and again in same area cannot get the plumbing snake to continue through in same area. So I got a idea where I would take the snake out of frame through a hole in frame just before said area, tuck it in around the shock tower and back in another hole to continue to back of truck and then in lift gate as video demonstrates.

— Richard Tomalty
★★★★★Feb 27, 2026

Love this product. Easy install that looks like it came that way from the factory. I highly recommend buying this if you are in the fence. If you can work basic tools you can do it yourself.

— John Prock
More from ClearVU drivers
Don't Want to Get Your Hands Dirty?

Find an Installer Near You.

Drag & Drop Files, Choose Files to Upload
Actual customer photo
Join the ClearVU Newsletter

Stay in the Clear.

New product drops, install tips, and the occasional ClearVU deal, straight to your inbox. No spam, no nonsense, just clean cameras and the occasional dad joke.
Unsubscribe anytime · We hate spam more than mud